INTERNATIONAL JOURNAL OF EMERGING TRENDS IN ENGINEERING AND DEVELOPMENT (IJETED)
|
FINITE-ELEMENT SIMULATION OF GAS METAL ARC CUTTING (GMAC)
PROCESS
Ali Moarrefzadeh#1
Faculty member of Mechanical Engineering Department, Mahshahr
Branch,
Islamic Azad University, Mahshahr, Iran
A.moarefzadeh@mahshahriau.ac.ir, A_moarrefzadeh@yahoo.com __________________________________________________________________________________
Finite-Element Simulation for Thermal Profile in Shielded Metal
Arc Welding (SMAW) Process
Ali Moarrefzadeh#1
Faculty member of Mechanical Engineering Department, Mahshahr
Branch,
Islamic Azad University, Mahshahr, Iran
A.moarefzadeh@mahshahriau.ac.ir, A_moarrefzadeh@yahoo.com __________________________________________________________________________________
Irreversibilities in annular sector duct with constant wall
temperature and laminar flow
Alireza Falahat#1
Department of
Mechanics, Mahshahr branch, Islamic Azad university, Mahshahr,
Iran
__________________________________________________________________________________
A Model-Based System for Automotive Emission Control
Rakesh Kumar Phanden#1, Puneet Katyal #2, Vishal Gulati #3
#1Department of Mechanical Engineering,, GJ-University of Science
and Technology, Hisar, India
rakeshphanden@gmail.com
#2Department of Mechanical Engineering, GJ-University of Science
and Technology, Hisar, India
katyalgju@gmail.com
#3Department of Mechanical Engineering, GJ-University of Science
and Technology, Hisar, India
vishal_gulati_in@yahoo.com __________________________________________________________________________________
A Study on Some Geotechnical Properties of Lime Stabilised
Expansive Soil –Quarry
Dust Mixes
Dr. Akshaya Kumar Sabat
Associate Professor, Department of Civil Engineering ITER,SOA
University
Bhubaneswar, India, E
mail;akshayasabat@yahoo.co.in,+91,9937948438 __________________________________________________________________________________
CYCLIC OXIDATION BEHAVIOUR OF PRESSURE VESSEL STEEL
AND AUSTENITIC STAINLESS STEEL
Vijay Kumar*, N.Arora a, S. Singh b
Mechanical and Industrial Engineering Department, Indian
Institute of Technology Roorkee, Roorkee 247667, India a
Metallurgical & Materials Engineering Department, Indian
Institute of Technology Roorkee, Roorkee 247667, India b
* Corresponding author: Vijay Kumar
E-mail: sonivijay85@gmail.com
Contact Number: (+91)9548847034 __________________________________________________________________________________
Heuristic Approach to Solve Constrained
n x 3 Flow Shop Scheduling with Break-down Interval,
Transportation Time and Weights of Job
Sameer Sharma#1, Deepak Gupta#2, Seema Sharma#3
#1Departrment of Mathematics, M.M.University
Mullana, Ambala, India, Email samsharma31@yahoo.com, Phone
00919814819064
#2 Departrment of Mathematics, M.M.University
Mullana, Ambala, India, Email guptadeepak2003@yahoo.co.in
#3 Departrment of Mathematics, D.A.V.College
Jalandhar City, Punjab, India, Email seemasharma7788@yahoo.com __________________________________________________________________________________
H-Shaped Triple Band MSPA for
Cellular Phone Applications
1B.T.P.Madhav, 1N.Suresh, 1VGKM Pisipati, 3Srikanth Sattenapalli,
4N.Jyothirmai
1Department of ECE, K L University, Guntur DT, AP, India
3M.Tech Project student, Mother Theresa Institute of Science and
Technology, Satthupally
3M.Tech Project student, Nimra college of engineering and
Technology, Ibrahimpatnam
Email: madhav.mtech@gmail.com
Allocation of Dynamic Channels for TDMA-based Multi-Hop Cellular
Networks
Mohammed Imtiaz Ali Ahsan#1
Asst. Professor, Muffakham Jah College of Engg & Tech, Hyd, AP.
India, imtiaz424@gmail.com __________________________________________________________________________________
Allocation of Dynamic Channels
for TDMA-based Multi-Hop Cellular Networks
Mohammed Imtiaz Ali Ahsan#1
Asst. Professor, Muffakham Jah College of Engg & Tech, Hyd, AP.
India, imtiaz424@gmail.com __________________________________________________________________________________
SELECTION OF MIXED SAMPLING PLAN WITH TIGHTENED CSP-3(k=i) PLAN
AS ATTRIBUTE PLAN INDEXED THROUGH MAPD AND MAAOQ
R. Sampath Kumar#1, S. Sumithra#2 and R. Radhakrishnan#3
#1 Assistant Professor, Department of Statistics, Government Arts
College, Coimbatore-641018.
Tamil Nadu,India.
E-mail : rsampath1969@gmail.com,, Mobile No : 9940804748.
#2 Assistant Professor, Department of Statistics, Dr.N.G.P Arts
and Science College, Coimbatore - 641048.
Tamil Nadu,India.
E-mail : sumithrasatvika@gmail.com, Mobile No : 9047524959.
#3 Associate Professor, Department of Statistics, PSG College of
Arts and Science, Coimbatore - 641014.
Tamil Nadu,India.
E-mail : rkrishnan_research@yahoo.com , Mobile No : 9842295764. __________________________________________________________________________________
THERMAL MAPPING OF A CAN TYPE GAS TURBINE COMBUSTION CHAMBER
USING CFD.
# 1Jawaharlal Darda Institute of Engineering and Technology,
Yavatmal India,
#2 Government Polytechnic, Amaravati __________________________________________________________________________________
S.D. SHUKLA #1and G.M.DEHERI#2
#1Department of Mathematics,
Shri. R.K.Parikh Arts and Science College, Petlad,
Gujarat(India)
E-mail: snehaldshukla@gmail.com Telephone: (02697-225198).
#2Department of Mathematics, Sardar Patel University, Vallabh
Vidhynagar, Gujarat
E-mail:gm.deheri@rediffmail.com
Telephone: (02692-233289). __________________________________________________________________________________
GENETIC ALGORITHM APPLICATION TO REACTIVE POWER CONTROL
MRS. SHRADDHA (GAJBHIYE) MOHANTY*
Assistant Professor (EED)
SVITS,Gram Baroli,Sanwer Road ,Indore-453331(MP),India
University:-RGPV, Bhopal
Mob No:-09926448946
Email:-shraddha_gajbhiye@yahoo.com __________________________________________________________________________________
Management Level Security in E-Commerce and Biometric Technology
Iqrar Ahmad#1, Arif Ahmad Khan#2
1Department of commerce, Aligarh Muslim University,
Aligarh, Uttar Pradesh, India
iqrar_azad@yahoo.co.in
ph: 0091-9997363670
2Accenture Services Pvt. Ltd,
Bangalore, India
arif.student@gmail.com
ph: 0091-8861630301 __________________________________________________________________________________
METHODOLOGY FOR THE PRODUCT SPECIFICATIONS
FOR MOTORCYCLE SHOCK ABSORBERS
Satish B. Purohit#1, S.R.Lapalikar#2, Niranjan Sharma#3
1-S G SInst.of Tech & Sci., Indore, 2- Indore Inst. of Tech &
Sci.,Indore,3- Industrial consultant, Indore
Purohitsb_55@yahoo.co.in
Vishal Gulati #1, Puneet Katyal #2
#1Department of Mechanical Engineering, GJ-University of Science
and Technology, Hisar, India
vishal_gulati_in@yahoo.com
__________________________________________________________________________________ Modeling of Blow-Moulds to Produce Decorative PET Bottles
Vishal Gulati #1, Puneet Katyal #2
#1Department of Mechanical Engineering, GJ-University of
Science and Technology, Hisar, India vishal_gulati_in@yahoo.com
#2Department of Mechanical Engineering, GJ-University of Science
and Technology, Hisar, India
katyalgju@gmail.com __________________________________________________________________________________
Analysis of Relative Energy Distribution in Indian Air
Pollutants using Continuous Wavelet Transform
Ashish Mittal, and Rashmi Bhardwaj*
School of Basic and Applied Science, Guru Gobind Singh
Indrapastha University, Delhi, India.
*Corresponding author (rashmib22@gmail.com,
rashmibhardwajmaths@ipu.edu) __________________________________________________________________________________
OPF Based Stress Relief and Global Voltage Stability Limit
Improvement using Two-Bus Equivalent Model
S.Sakthivel,
Asst.Prof.,Dept. of Electrical and Electronics Engineering,
V.R.S. College of Engineering and Technology, Villupuram, TN,
India.
E-mail:sithansakthi@gmail.com
Dr.D.Mary,
Prof. ,Dept. of Electrical and Electronics Engineering,
Government College of Engineering, Bargur, TN, India. __________________________________________________________________________________
Distribution of SiC particulates in stir cast Aluminium alloy
Metal matrix composites and its effect on mechanical properties
Rabindra Behera1*,Nihar Ranjan Mohanta1,G.Sutradhar2
1Faculty, Department of mechanical Engineering, Seemanta
Engineering College, Orissa,India
2Professor, Department of mechanical Engineering, Jadavpur
University, Kolkata, West Bengal, India
Corresponding Author: Mr. Rabindra Behera, Asst. Professor,
Department of Mechanical Engineering, Seemanta Engineering
College, Orissa,India
Tele. Phone No.:-09438461747
E-mail Address: - rabi_lisha@yahoo.com __________________________________________________________________________________
Specially Structured Two Stage Flow Shop Scheduling To Minimize
the Rental Cost
Deepak Gupta#1, Sameer Sharma#2, Shashi Bala#3
#1 Department of Mathematics, M.M.University
Mullana, Ambala, India, Email guptadeepak2003@yahoo.co.in
#2 Department of Mathematics, M.M.University
Mullana, Ambala, India, Email samsharma31@yahoo.com, Phone
00919814819064
#3 Department of Mathematics, M.M.University
Mullana, Ambala, India, Email shashigarg97@gmail.com __________________________________________________________________________________
COMPUTATION OF A SUMMATION FORMULA INVOLVING BAILEY
THEOREM AND CONTIGUOUS RELATION
Salahuddin
P.D.M College of Engineering, Bahadurgarh , Haryana , India
Emails: sludn@yahoo.com ; vsludn@gmail.com __________________________________________________________________________________
Experimental Analysis & Fabrication of Testing Rig For
Rotating Elevator
1Hemant Kumar Nayak, 2Anuj Shukla, 3Nagendra Prasad,4Rashmi Rekha
Behera,
1,2,3Department Of Mechanical Engineering
4Department Of Electrical & Electronics Engineering
Hindustan College of Science & Technology, Faraha, Mathura
(E-mail:hemant.kumar008@rediffmail.com)
(+91-9557603407) __________________________________________________________________________________
Thermal Analysis of Drilling Tool
Ravinder Kataria#1, Puneet Katyal #2, Vishal Gulati #3, Arun
Gupta #4
#1Department of Mechanical Engineering, NC College of
Engineering, Panipat,
India
ravinderkataria419@gmail.com
#2Department of Mechanical Engineering, GJ-University of Science
and Technology, Hisar, India
katyalgju@gmail.com
#3Department of Mechanical Engineering, GJ-University of Science
and Technology, Hisar, India
vishal_gulati_in@yahoo.com
#4Department of Mechanical Engineering, Vaish Engineering
College, Rohtak, India
arun_gupta@engineer.com __________________________________________________________________________________
T
WAVE EXTRACTION AND ANALYSIS USING DISCRETE WAVELETS
Manimegalai.P1, Bharathi.P2, Dr.K.Thanushkodi3
1Assistant Professor, Biomedical Instrumentation Engineering,
Karunya University
Coimbatore 641 114, Tamil Nadu, India
2PG Scholar, Biomedical Instrumentation Engineering, Karunya
University
Coimbatore 641 114, Tamil Nadu, India
manimegalai.vairavan@gmail.com
3Director, Akshaya College Of Engineering,Coimbatore,
Tamilnadu,India
__________________________________________________________________________________
Three Dimensional CFD Analysis of Backward Curved Radial Tipped
Blade Centrifugal Fan Designed as per Unified Methodology with
Varying Number of Blades
N. Vibhakar #1, S. D. Masutage#2, S. A. Channiwala#3
#1 Mechanical Engineering Department, Sarvajanik College of
Engineering & Technology, Surat – 395 001,
Gujarat, India, nitin.vibhakar@scet.ac.in, Phone No.
0919428868858.
#2 Mechanical Engineering Department, Sarvajanik College of
Engineering & Technology, Surat – 395 001,
Gujarat, India, v_nitin1@rediffmail.com, Phone No. 0917567261003.
#3 Mechanical Engineering Department, S. V. National Institute of
Technology, Ichhchhanath, Surat - 395 007,
Gujarat, India, sac@med.svnit.ac.in, Phone No.0919924166200. __________________________________________________________________________________
A
FIXED POINT THEOREM FOR n MAPPINGS ON n
METRIC SPACES
VISHAL GUPTA1, ASHIMA KANWAR2 AND S.B SINGH3
1Department of Mathematics
Maharishi Markandeshwar University
Mullana, Ambala, Haryana, (India)
2Department of Mathematics
Maharishi Markandeshwar University
Mullana, Ambala, Haryana, (India)
3Department of Mathematics
Punjabi University, Patiala, Punjab, (India) __________________________________________________________________________________
GENERATION OF VARIABLE LENGTH ERROR CORRECTING CODES USING
CONSTANT LENGTH ERROR CORRECTING CODES
Richa Gupta*, BhuDev Sharma **
*Senior Lecturer, ECE Department, ** Professor, Department of
Mathematics,
Jaypee Institute of Information Technology
A-10, Sector 62, Noida, UP-201307, India
rgupta.ece@gmail.com, bhudev_sharma@yahoo.com __________________________________________________________________________________
Exergy Destruction of Water-Al2O3
Nanofluids in Duct under Constant Wall Heat Flux and Turbulent
Flow
Alireza falahat
Department of Mechanics, Mahshahr branch, Islamic
Azad University, Mahshahr, Iran __________________________________________________________________________________
COMPARATIVE ANALYSIS OF K-MODEL
Suresh Chand Gupta*
Ashok kumar#
*Panipat Institute of Engineering & Techonology, Samalkha __________________________________________________________________________________
Evaluating Book Content of Junior High School in Geometric
Transformations Subject, Corresponding to the Cognitive Growth
of Students
Jafar Poyamanesh, PhD
Department of Mathematics, Science and Research Branch, Islamic
Azad University, Tehran, Iran
Maryam Zare, Student of M.S
Department of Mathematics, Science and Research Branch, Islamic
Azad University, Tehran, Iran __________________________________________________________________________________
Branch And Bound Technique for n×3 Flow
Shop Scheduling Problem Including Transportation Time and
Processing Time Associated With Their Respective Probabilities
Deepak Gupta
Prof. & Head, Department of Mathematics
Maharishi Markandeshwar University
Mullana, Ambala (India)
Payal Singla*
Research Scholar, Department of Mathematics
Maharishi Markandeshwar University
Mullana, Ambala (India)
Shashi Bala
Research Scholar, Department of Mathematics
Maharishi Markandeshwar University
Mullana, Ambala (India) __________________________________________________________________________________
Self-Purification Potential of a Tropical Lake: Case Study of
Oguta Lake, Eastern Niger Delta Basin, Nigeria.
C.A. Ahiarakwem*.,
G.I.Nwankwor., and A.I.Opara
Department of
Geosciences, Federal University of Technology, Owerri, Imo
State, Nigeria.
Tel.
+234-0803-3738340
*Email:
Cosahia@yahoo.com __________________________________________________________________________________
|